|
Magnetically shielded
Only 1,5 mm high
Economical alternative to larger
power inductors
Specially designed for best pick and
place handling
Saturation current ratings up to 550 mAmps
Inductance values from 0.78 µH to 47 µH
RoHS Compliant. 260° compatible. Silver-palladium-platinum-glass
frit terminations.
COTS Plus tin-silver-copper and tin-lead terminations available
terminations
|
|
|
Magnetically shielded
Only 2,0 mm high
Economical alternative to larger
power inductors
Specially designed for best pick and
place handling
Saturation current ratings up to 900 mAmps
Inductance values from 1 µH to 330 µH
RoHS Compliant. 260° compatible. Silver-palladium-platinum-glass
frit terminations.
COTS Plus tin-silver-copper and tin-lead terminations available
|
|
|
Magnetically shielded
Only 2.74 mm high
Economical alternative to larger power inductors
10% inductance tolerance for all values
Custom versions available
RoHS Compliant. 260° compatible. Silver-palladium-platinum-glass
frit terminations.
COTS Plus tin-silver-copper and tin-lead terminations
available
|
|
|
18 new L values:
1.0 µH – 47 µH, 100 µH
High performance in transmit and receive filters
Low DC resistance
Magnetically shielded
Only 3,81 mm high
RoHS-compliant. 260° compatible. Silver-palladium-platinum-glass
frit terminations.
COTS Plus tin-silver-copper and tin-lead terminations
available
|
|
|
Magnetically shielded
Only 3,81 mm high
Economical alternative to larger power inductors
Specially designed for best pick and place handling
Custom versions available
RoHS-compliant. 260° compatible. Silver-palladium-platinum-glass
frit terminations.
COTS Plus tin-silver-copper and tin-lead terminations
available
|
|
|
Magnetically shielded
Highest efficiency of any comparable parts
10% to 60% lower DCR than other currently available inductors
Surface mount design, fully pick and place compatible
Designed for use at switching frequencies from 50 kHz
to 1 MHz
Defense Supply Center CID A-A-59741
Custom versions available
RoHS-compliant. 260° compatible. Gold over nickel
over moly-manganese terminations.
COTS Plus tin-silver-copper and tin-lead terminations
available
|
|
|
The ultimate in
cost-effective, miniature
power inductors
True surface mount design, magnetically shielded, fully
pick and place compatible
Specially designed to have a "swinging" inductance
vs current characteristic
Defense Supply Center CID A-A-59235
RoHS-compliant. 260° compatible. Gold over nickel
over moly-manganese terminations.
COTS Plus tin-silver-copper and tin-lead terminations
available
Custom versions available
|
|
|
Magnetically shielded
Excellent current carrying capabilities in a small footprint
- only 0.510" x 0.370"
Up to 5 Arms and 5.6 A saturating current
Flat top for reliable surface mounting
Robust temperature deflection prevents damage during
solder reflow
Custom versions available
RoHS-compliant. 260° compatible. Gold over nickel
over phos bronze terminations.
COTS Plus tin-silver-copper and tin-lead terminations
available
|
|
|
Specially designed
to provide low loss benefit of ferrite and soft saturation
Defense Supply Center CID A-A-59406
RoHS-compliant. 260° compatible. Gold over nickel
over phos bronze terminations
COTS Plus tin-silver-copper and tin-lead terminations
available
Custom versions available
|
|
|
Magnetically shielded
Designed for higher load currents - up to 18 A saturating
current, 6.5 A rms
Very low DCR keeps power losses to a minimum
Flat top for reliable surface mounting
Robust temperature deflection prevents damage during
solder reflow
End terminations for sound solder fillets and easy
inspection
Custom versions available
RoHS-compliant 260° compatible. Gold over nickel
over phos bronze terminations.
COTS Plus tin-silver-copper and tin-lead terminations
available
|
|
|
Specially engineered
for demanding backlighting applications
High breakdown voltage and exceptional efficiency
10% to 60% lower DCR than currently available inductors
True surface mount design, fully pick and place compatible
Custom versions available
RoHS-compliant. 260° compatible. Gold over nickel
over moly-manganese terminations
COTS Plus tin-silver-copper and tin-lead terminations
available
|
|
|
Magnetically
shielded
Very small footprint, just 6 mm x 7.1 mm
Saturation current rating up to 2.15 Amps
Low DC resistance for greater efficiency
Inductance ratings from 2.2 to 470 µH
RoHS-compliant. 260° compatible. Tin over nickel
over phos bronze terminations
COTS Plus tin-silver-copper and tin-lead terminations
available
|
|
|
Ideal for use
as coupled inductors in SEPIC applications
Can be used as two inductors connected in series or parallel,
or as a transformer
Saturation current rating up to 14.9 Amps!
Low DC resistance provides greater efficiency
Inductance ratings from 4.7 to 1000 µH; from 18.8
to 4000 µH when connected in series
Very high reliability and low cost
RoHS-compliant. 260° compatible. Tin over nickel
over phos bronze terminations
COTS Plus tin-silver-copper and tin-lead terminations
available
|
|
|
Magnetically shielded
Saturation current rating up to 8.3 Amps
Low DC resistance for greater efficiency
Inductance ratings from 1.5 to 1000 µH
Very high reliability and low cost
RoHS-compliant. 260° compatible. Tin over nickel
over copper terminations
COTS Plus tin-silver-copper and tin-lead terminations
available
|
|
|
Magnetically shielded
Saturation current rating up to 15 Amps
Low DC resistance for greater efficiency
Inductance ratings from 1 to 1000 µH
Very high reliability and low cost
RoHS-compliant. 260° compatible. Tin over nickel
over phos bronze terminations
COTS Plus tin-silver-copper and tin-lead terminations
available
|
|
|
Magnetically
shielded
Saturation current rating up to 22 Amps!
Low DC resistance for greater efficiency
Inductance ratings from 1.4 to 1000 µH
10% tolerance for parts >100 µH
Very high reliability and low cost
RoHS-compliant. 260° compatible. Tin over nickel
over phos bronze terminations
COTS Plus tin-silver-copper and tin-lead terminations
available
|
|
|
Only 4 mm square
and 2 mm high
Magnetically shielded
Saturation current rating up to 1.1 Amps
Less than 15°C temperature rise at ?sat
Inductance ratings from 3.3 to 100 µH
Very high reliability and low cost
RoHS-compliant. 260° compatible. Tin over nickel
over phos bronze terminations
COTS Plus tin-silver-copper and tin-lead terminations
available
|
|
|
Magnetically
shielded
Very small footprint, just 5.1 mm square
Current rating up to 1.9 Amps
Low DC resistance for greater efficiency
Inductance ratings from 2.2 to 390 µH
RoHS-compliant. 260° compatible. Gold over nickel
over phos bronze terminations
COTS Plus tin-silver-copper and tin-lead terminations
available
Also see MSS6122 and MSS6132 Series
|
|
|
Magnetically
shielded
Very small footprint, just 6.1 mm square
Current rating up to 1.85 Amps
Low DC resistance for greater efficiency
Inductance ratings from 4.7 to 100 µH
RoHS-compliant. 260° compatible. Gold over nickel
over phos bronze terminations
COTS Plus tin-silver-copper and tin-lead terminations
available
Also see MSS6132 and MSS5131 Series
|
|
|
Magnetically shielded
Very small footprint, just 6.1 mm square
Current rating up to 1.8 Amps
Low DC resistance for greater efficiency
Inductance ratings from 4.7 to 100 µH
RoHS-compliant. 260° compatible. Gold over nickel
over phos bronze terminations
COTS Plus tin-silver-copper and tin-lead terminations
available
Also see MSS6122 and MSS5131 Series
|
|
|
Magnetically
shielded
Saturation current rating up to 3.5 Amps
Low DC resistance for greater efficiency
Inductance values from 3.3 to 100 µH
Very high reliability and low cost
RoHS-compliant. 260° compatible. Gold over nickel
over phos bronze terminations
COTS Plus tin-silver-copper and tin-lead terminations
available
|
|
|
Saturation current
ratings up to 37 Amps
Exceptionally low DC resistance
Ideal for low-voltage, high-current DC-DC converters
and VRD/VRM controllers
Inductance is unaffected by part temperature up to +135°C
RoHS compliant. 260° compatible. Tin-silver over
copper terminations.
COTS Plus tin-silver-copper and tin-lead terminations
available
|
|
|
Designed for VRM/VRD
controllers
Best current handling of any inductor its size
Low core loss and soft saturation versions
Inductance values from 0.25 to 2.3 µH
Low profile with excellent performance-to-height ratio.
|
|
|
Extremely robust,
space saving package
Saturation current ratings up to 48 Amps
Exceptionally low DC resistance
Custom versions available
RoHS-compliant. 260° compatible. Tin over nickel
over phos bronze terminations.
COTS Plus tin-silver-copper and tin-lead terminations
available
|
|
|
Extremely reliable
and rugged single-piece core design
Low profile, space saving package
Saturation current ratings up to 50 Amps
Exceptionally low DC resistance
Single- and dual-conductor versions available
RoHS compliant. 260° compatible. Tin over copper
terminations.
|
|
|
Saturation current
ratings up to 100 Amps!
Exceptionally low DC resistance at 5% tolerance
Ideal for VRM/VRD regulators
Small footprint – requires less than 60 mm2 board
space
Tight inductance tolerance – 10% for all values
RoHS compliant. 260° compatible. Tin over copper
terminations
|
|
|
Very high current
ratings - up to 13.9 Amps
Low profile - as low as 7,0 mm
Toroid winding virtually eliminates stray electromagnetic
emissions
Flat top and self-leaded design for reliable surface
mounting
RoHS compliant. 260° compatible. Tin-silver over
copper terminations.
Custom versions available
|
|
Request Designer's Kit
Specifications
